Freight & Tarp Protection
CARGO-ARMOR Freight & Tarp Protection
Reduce your damage losses with CARGO-ARMOR. Lost profits to damaged freight claims are a problem every freight hauler can do without. CARGO-ARMOR helps keep your profits in the bank. CARGO-ARMOR protection devices are designed to minimize or eliminate damage to your freight caused by the over tightening of load straps, sharp edges or crushing of containers during tarping. Our CARGO-ARMOR Strap Guard is designed to spread the tension of the tie-down strap over a wider area, protecting your freight from crushing forces. The HDPE angle is designed to accommodate straps up to four inches wide. The CARGO-ARMOR Corner Guard is designed to protect container corners from damage caused by tarp hang-ups or excessive drag while tarping. Not only will the corner guard protect your valuable freight, but it will also protect your expensive tarps and straps from hanging and ripping on sharp corners.
Durability
- Constructed from Tough HDPE
- Reinforced Stress Points
- Superior Impact & Wear Resistance
- UV / Weather Resistent
Performance
- Protects freight from strap damage
- Protects tarp from tearing on corners
- Nestable for Easy Storage
- Reduced Freight Damage Claims
- Extends Life for Straps & Tarps
- Rot / Rust / Corrosion Proof
- Non-Porous / Moisture Resistant
- Light Weight / Rigid Designs
- No Rough Edges, Splinters
- Cost Effective
Manufacturer recommends storing product away from exposure to the sun, as its U.V. rays and other general weather conditions will diminish the life of the product. Exposure to outside weather elements voids all warranties.
Products
CARGO-ARMOR Strap Guard
The CARGO-ARMOR Strap Guard is designed to spread the tension of the tie-down strap over a wider area, while protecting your freight from the crushing forces. The HDPE angle is designed to accommodate straps up to four inches wide. This inexpensive device is nestable for easy storage.
Model: CASN8X10 90 BL
Size: 8″ X 10″ (20.32cm x 25.4cm)
Colors: Blue (Custom colors available with minimum quantity purchased)
CARGO-ARMOR Tarp Guard
The CARGO-ARMOR Corner Guard is designed to protect container corners from the damage caused by tarp hang-ups or excessive drag while tarping. Not only will the corner guard protect your valuable freight, but it will also protect your expensive tarps from hanging and ripping on sharp corners. This is a cost saver no matter how you look at it.
Model: CACORNER B
Size: 8″ X 8″ X 4″ (20.32cm x 20.32cm x 10.16cm)
Colors: Black (Custom colors available with minimum quantity purchased)
Specs
CARGO-ARMOR Strap Guard
| Model | Size (W x L) | Color | |
| in. | cm | ||
| CASN8X10 90 BL | 8″ x 10″ | 20.32 x 25.4 cm | Blue, Custom* |
*Custom colors available with minimum quantity purchase.
CARGO-ARMOR Tarp Guard
| Model | Size (W x L x H) | Color | |
| in. | cm | ||
| CACORNER B | 8″ x 8″ x 4″ | 20.32 x 20.32 x 10.16 cm | Black, Custom* |
*Custom colors available with minimum quantity purchase.
Photos
PRODUCT
Click on thumbnails to enlarge image.
IN THE FIELD
Media / Lit
Media / Literature
Click to download the documents below.
Sample Request
Related Product
CONTACT OUR SALES TEAM
Click the photo of the rep below to contact them directly.
Sonya Fisher
Inside SalesElvind Flores
Inside / International SalesAlexis Garcia
Inside / International SalesJanet Monk
Inside SalesMatt Porter
KS, NE, OK, MO, CO, AR, PABrad Trost
MN, IA, ND, SDCarlos Camiciottoli
Mexico, Central AmericaAndre Rigo
South America
